for Lotus DominoClick the name of a connector in the Connectors or Users subtab to view and edit its properties. The following sections describe the connector setup panel.
Please note that some fields and groups of fields only apply to one particular collaboration system. Such fields are marked with a symbol in this manual:
for Lotus Domino
for Microsoft Exchange
Furthermore, some fields in the user interface are marked with a red * (asterisk). Such fields are considered mandatory - if they are not completed, DME will not work correctly. For instance, the LDAP server field in the Authentication setup panel is mandatory - but only if the current connector is set up to serve authentication requests (Enable authentication = On).
On every subtab in the panel sections of this Connector setup panel, you can choose the following options:
Saves the changes you have made in the current subtab. Note that switching subtabs also saves any changed values in the current subtab.
Restores the values in the current subtab to whatever they were before you opened the subtab or pressed Save. Canceling brings you back to the main Connector page.
Note that for reasons of overall stability, it is important that all network equipment is not set to auto-negotiate speed. The network equipment (network interface cards, firewalls etc.) should always be set to the speed of the slowest network component in the chain to prevent speed fallbacks and resending of network packets.