If the current group is based on Apple iOS devices, you can use this panel section to send one or more Apple iOS configuration profiles to the current group of devices. The profiles are made available in this panel section when they are uploaded through the Provisioning > Apple iOS profiles page (see Apple iOS profiles).
When you use this function to add a profile to a group of Apple iOS device, the devices will become enrolled with DME if they are not already enrolled.
To install profiles on the current group of devices, select the profiles you wish to install by switching them ON (or OFF if you want to remove them). Then click Save. The profiles will then be installed on the devices.
Note that the installation or removal process has a separate schedule. The server checks for changes in device profiles every 15 minutes between 08.00 and 16.00 server time. It may therefore take up to 15 minutes for the installation to start, or it will begin at 8 the following morning.
Profiles can also be added to individual devices. If a device already has a profile added, and the same profile is added through a group in this window later on, then the group setting will override the device profile, making it impossible to remove the profile from the device. If the profile is removed from the group, it will again be possible to remove the profile from the device (but it is not removed automatically).