The Configuration profiles subtab shows details about the configuration profiles installed on the device. Configuration name, Identifier, and Owner are shown by default. You can expand each configuration to see more details.
An enrolled device always contains the configuration profiles called DME Mobile Device Management and iPhoneCA. These profiles are installed on the device when they are enrolled into the DME system.
Configuration profiles can be sent to the device using the Configuration setup panel of the Apple iOS profiles page in the Provisioning tab. See Apple iOS profiles for more information. Such profiles can be used for setting security and other settings (Payloads) on the enrolled device.
Two actions are available from this subtab:
Remove installed profile: Select one or more profiles, and click this action to delete them. Note that if you delete the profile called DME Mobile Device Management, you will need to re-enroll the phone before you can contact it again. Furthermore, anything that has been installed using the MDM profile will be removed from the device. To update a profile, you must delete it from this panel section and re-send the edited profile from Provisioning > Apple iOS profiles > Configuration.
Refresh installed profile list: Click this action to update the list of profiles on the device. The list is also updated when this page is loaded.
Remove installed profile: Select one or more profiles, and click this action to delete them. Note that if you delete the profile called DME Mobile Device Management, you will need to re-enroll the phone before you can contact it again. Furthermore, anything that has been installed using the MDM profile will be removed from the device. To update a profile, you must delete it from this panel section and re-send the edited profile from Provisioning > Apple iOS profiles > Configuration.
Refresh installed profile list: Click this action to update the list of profiles on the device. The list is also updated when this page is loaded.